KONDUIT KABEL / EMT CONDUIT PIPE (ELECTRONIC METALIC TUBING)
Model Number EMT Type / E type
Spesification ANSI UL 797/ JIS C8305 – 1972
Packaging Details Ten each with one bundless
Size ( ½’’ – 2’’) (E-19 – E-75)
Unit Length (3,0 meter) ANSI UL 797 / (3,66 meter) JIS C 8305
Electrical Metallic Tubing
is made from strip steel, high frequency welded. A continuous hot galvanized process is employed to coat exterior surfaces evenly and smoothly; a special transparent secondary coating provides further protection against corrosion. in accordance with UL-797 or JIS C8305,for open, concealed and concrete slab installations.
Electrical Metallic Tubing (EMT), also commonly called thin-wall, is a listed steel raceway of circular cross section which is unthreaded, and nominally 3 m / 3,66 m long, EMT is available in trade sizes 1/2 through 2. The outside is galvanized for corrosion protection and the inside has an approved corrosion resistant organic coating.
EMT pipe is designed to protect and route cables and conductors. It can be installed either exposed or concealed. Install it inside or outside using rain-tight fittings. This EMT pipe is made of an unthreaded galvanized steel and has an organic coating inside.
An un threaded thin-wall raceway of circular cross-section designed for the phycical protection and routing of conductors and enables for use as an equipment grounding conductor when installed utilizing appropriate fitting
Brand : Panasonic/Indonesia
For Further Information Please Contact :
DWIKARYA CIPTA UTAMA
JL. Raya Imam Bonjol KM 2 No. 44 Karawaci (Workshop)
Tangerang, Prop. Banten 15139 Indonesia
Tel : 021-55732966
Fax : 021-55735587
Email : email@example.com firstname.lastname@example.org
Web : www.dwikaryacipta.com WA : 081519443921